FATSAC

FatSac Jabsco Ballast King Pump The Jabsco Ballast King Pump from FatSac is built to move serious water, fast. Designed specifically for Wakeboard Liquid Ballast Tanks, this reversible pump fills your bags on the way out and drains them just as quickly...

FatSac Jabsco Xylem Ballast Puppy Pump The FatSac Jabsco Xylem Ballast Puppy Pump offers reliable, efficient ballast control in a compact reversible design. Built to both fill and drain Wakeboard Liquid Ballast Tanks, this pump moves water at 9 gallons...

FatSac 1" Stainless Steel Thru-Hull The FatSac 1" Stainless Steel Thru-Hull is a durable, corrosion-resistant fitting designed for clean, professional ballast system installations. Built from high-quality stainless steel, it provides a secure water...

FatSac Male Quick Connect 1-1/8" Barbed SUPA Pump Hose Fitting The FatSac Male Quick Connect 1-1/8" Barbed SUPA Pump Hose Fitting is a durable, easy-to-use connector designed for fast, secure attachment in your ballast system. Built to pair with the W730...

FatSac 1-1/2" Flow-Rite QC Straight Fitting The FatSac 1-1/2" Flow-Rite QC Straight Fitting offers a clean, secure way to connect 1-1/2" ballast hose within a Flow-Rite quick-connect system. Designed for simplicity and reliability, this straight fitting...

FatSac 1-1/2" Flow-Rite QC Elbow Fitting The FatSac 1-1/2" Flow-Rite QC Elbow Fitting provides a smooth, angled connection point within your ballast system, ideal for routing hose around tight spaces or bends without restricting flow. Designed for...

FatSac 1-1/2 x 12 UNF Flow-Rite QC Tallulah Pump Fitting The FatSac 1-1/2 x 12 UNF Flow-Rite QC Tallulah Pump Fitting provides a secure, high-flow connection point for Tallulah pump installations. Designed with Flow-Rite quick-connect compatibility, this...

FatSac Elbow Thru-Hull Fitting, 1-1/8" The FatSac 1-1/8" Elbow Thru-Hull Fitting provides a clean, angled connection point for routing ballast hose through the hull where straight fittings won’t fit or would create sharp bends. Its elbow design...

FatSac Johnson SPX Tallulah Ballast Pump The FatSac Johnson SPX Tallulah Ballast Pump is a high-performance reversible pump built to fill and drain ballast tanks quickly and reliably. Engineered for both fresh and saltwater use, it features a durable...

FatSac Thru-Hull, Threaded, Flanged, 1-1/8" The FatSac 1-1/8" Threaded Flanged Thru-Hull provides a secure, clean passthrough for ballast plumbing where durability and reliability matter. Its threaded body allows for a firm, sealed mount, while the...

FatSac Johnson SPX Talulah HF Ballast Pump The FatSac Johnson SPX Talulah High Flow Reversible Ballast Pump is engineered for riders who want the fastest, most efficient ballast movement possible. Delivering an impressive 250 pounds per minute, it stands...

FatSac Double 1-1/8" Quick Connect Fitting The FatSac Double 1-1/8" Quick Connect Fitting is designed for situations where you need two secure quick-connect points in a compact form. This double-sided connector makes it easy to link components, extend...

FAT SAC Clear Reinforced Kink-proof Tiger Hose 1-1/8" (51017) The FAT SAC Clear Reinforced Kink-proof Tiger Hose 1-1/8" (51017) is the go-to solution for reliable ballast plumbing in modern wake and surf boats. This clear, helical reinforced hose is...

FAT SAC 3/4" ID Clear Helical Pump Hose (51013) The FAT SAC 3/4" ID Clear Helical Pump Hose (51013) is a durable, kink-proof solution for ballast pump and plumbing applications. Built with helical reinforcement, this hose maintains consistent water flow...

FAT SAC 1-1/2" ID Clear Helical Pump Hose (51012) The FAT SAC 1-1/2" ID Clear Helical Pump Hose (51012) is built for high-flow ballast and pump applications where durability and reliability matter most. Featuring a helical reinforced design, this hose...

Fat Sac Permanent Epoxy Fat Sac Permanent Epoxy for Cementing any FLY HIGH fittings into the sacs for Auto Ballast Mix well Apply on threads of fittings going into Fat sacs

FATSAC Pro X Series Black Floor Sac This Surf Sac is the ideal weight to have in the boat, and will fit and fill any V-Drive rear compartment, but will work in other areas of the boat and will give you maximum weight. The surf sac is also capable to work...

FATSAC's Automatic Venting Cap allows the air to bleed from the bag, but not water. Made from 6/6 Nylon with a proprietary Heyco membrane inside. Perfect for fully automated systems in boats.

12/24 V input voltageDual USB charging port with a 5V/3.1A total outputDigital display for readoutsDual power socketsOn/Off switch on the dual socketsIntelligent current input by adjusting and sharing the charging current automaticallyUser-friendly...

1" Hose/Sac Thread w/ Suction Stop Ballast Fitting

1" Suction Stop Quick Connect Ballast Fitting

FATSAC 3/4" Suction Stop Quick Connect Ballast Fitting 3/4" Suction Stop Quick Connect Ballast Fitting

The FATSAC Floor Sac gives you that extra weight needed for a crispy wake!Sac comes with 2 valves with (1) Quick Twist/Sac Thread Adapter (W730) Ballast Fitting and (1) Air Release Bag Plug (W749) Ballast Fitting.Dimensions: 42" x 40" x 13"

The FATSAC Floor Sac gives you that extra weight needed for a crispy wake!Dimensions: 40" x 40" x 8.5"

FATSAC Supa Tsunami Pump Take your ballast setup to the next level with the FATSAC Supa Tsunami Pump – the fastest and most reliable portable ballast pump on the market. Designed specifically for FATSAC ballast bags, this high-capacity pump offers...

FATSAC V-Drive Wake Surf Sac (W713) Ballast Bag The FATSAC V-Drive Wake Surf Sac fits perfectly in the rear compartments (to either side of the engine) of your V-drive boat to produce a nice wake for surfing.  Try combining this sac with the FATSAC...

FATSAC Jumbo V-Drive Surf Sac (W719) Ballast BagThis sac will conform to fit and fill any rear V-Drive compartment to give you maximum weight. It will also conform to fit in other places and in other type boats.Dimensions: 50" x 24" x 24" Compatible...

After filling any factory ballast and FatSac that fill the front and rear compartments of your V-drive boat, put the Ultimate Wake Surf Sac on top of the rear seat and side seat that you are wakesurfing on for the ultimate surf wake.  This will displace...

FATSAC Integrated Bow (W711) Ballast BagThe FATSAC Integrated Bow Sac is designed to fit under the seats of open bow boats, adding needed weight to the front of the boat for the perfect weight distribution.  It will fit under the seats of any open bow...

The FATSAC Fat Seat is designed for inboard boats that have a removable rear seat. This thing is huge and its strong enough to sit on. It has two arms that extend forward on either side of the engine compartment to add even more weight. *Custom Color...

FATSAC Fat Sac (W707) - 50" x 20" x 20" Ballast Bag FATSAC's new line of Pro X Series Quick Connect fat sacs are made with Valmex material, which is similar to the materials used in making river rafts...and makes punctures and abrasions virtually a thing...

The FATSAC Open Bow Sac is triangular in shape and fits open bow boats.  Just set it up front and fill it.  The size of this sac allows you to fine-tune the forward and aft weight distribution.  Chances are that this is the only sac you will need up...

Rear seat bottom/center locker sac. *Custom Color Upcharge - BLUE, RED, WHITE, or CAMO 650 Lbs. total ballast weight at recomended capacity.Dimensions: 62" L x 26" W x 10" H. Compatible with FATSAC Supa Tsunami Pump (no conversion parts needed)!

FATSAC Tube Sac (W704) - 62" x 16" x 10" Ballast Bag The FATSAC Tube Sac can be used in the ski locker of your boat or on the floor just forward of the engine compartment. It's longer and narrow enough to fit perfectly along the walkway to the bow or...

FATSAC Side Sacs fit along the side of the engine compartment on inboard boat...and they will conform to fit under the seats of open bow boats. They are designed to get more weight to the center of the boat to balance any ballast you may have aft of the...

FATSAC Fat Brick with Handles (W702) - 16" x 16" x 16" Ballast Bag Compact. Versatile. Heavy-Duty Ballast Solution. Add precise weight exactly where you need it with the FATSAC Fat Brick (W702). Measuring 16" x 16" x 16" and holding up to 155 lbs of...

FATSAC's new line of Pro X Series Quick Connect fat sacs are made with Valmex material, which is similar to the materials used in making river rafts...and makes punctures and abrasions virtually a thing of the past.  The seams are welded and taped so...

FATSAC Air Release Bag Plug – W749 Ballast Fitting The FATSAC Air Release Bag Plug W749 is a must-have accessory for your ballast setup, making it quick and easy to release excess air while keeping water securely sealed inside your bag. Designed...

Sac Valve Thread for Tsunami Pump

FATSAC Flow‑Rite 1‑1/8″ Elbow Quick Connect (W746) Ballast Fitting The FATSAC Flow‑Rite 1‑1/8″ Elbow Quick Connect Fitting (W746) makes ballast setup a breeze by providing a secure, tool-free 90-degree connection between your ballast hose...